Featured Picture:
Nest thermostats are a preferred alternative for owners seeking to improve their house’s heating and cooling system. They’re straightforward to make use of, environment friendly, and may prevent cash in your power payments. However what if you’ll want to take away your Nest thermostat? Possibly you are shifting, or possibly you’ll want to exchange your thermostat for one more purpose. Regardless of the purpose, eradicating your Nest thermostat is a comparatively easy course of. This is a step-by-step information on how you can do it.
Earlier than you begin, you may want to assemble just a few instruments. You will want a screwdriver, a pair of pliers, electrical tape, and a degree. After getting your instruments, you are prepared to start the elimination course of. First, flip off the facility to your thermostat on the circuit breaker panel. Subsequent, take away the faceplate of your thermostat by gently pulling it away from the wall. Now, you’ll entry the wires which might be linked to your thermostat. Notice the place of every wire earlier than disconnecting them. As soon as the wires are disconnected, you may take away the thermostat from the wall. To do that, merely unscrew the 2 screws which might be holding it in place.
Now that your thermostat is eliminated, you may set up your new thermostat. To do that, merely comply with the directions that got here together with your new thermostat. As soon as your new thermostat is put in, you may flip the facility again on on the circuit breaker panel. Your new thermostat ought to now be working correctly. When you’ve got any issues, seek the advice of the directions that got here together with your new thermostat or contact a certified electrician.
Detaching the Faceplate
To take away the Nest Thermostat, it’s essential to first detach the faceplate from the bottom. This is a step-by-step information on how you can do it:
- Determine the small launch button: The faceplate of the Nest Thermostat has a small launch button positioned on the backside heart. It is a tiny, round button, barely noticeable towards the faceplate.
- Press and maintain the discharge button: Use your fingernail, a pen, or any skinny object to press and maintain down the discharge button. It is best to really feel a slight click on or resistance when it is correctly engaged.
- Gently pull the faceplate away: Whereas holding down the discharge button, fastidiously pull the faceplate straight towards you. It ought to detach from the bottom with a slight tug. Be light and keep away from twisting or bending the faceplate.
- Launch the discharge button: As soon as the faceplate is indifferent, you may launch the discharge button. The faceplate is now free from the bottom, revealing the thermostat’s wiring and terminal connections.
Warning: Don’t pry or pressure the faceplate off. If it does not come off simply, test that you just’re holding down the discharge button correctly. Extreme pressure can harm the thermostat.
Disconnecting the Wiring
To securely take away your Nest Thermostat, it’s important to disconnect the wiring first. This is an in depth information that can assist you by means of this step:
Determine the Wires
Earlier than disconnecting something, take a second to determine the wires linked to the thermostat. They may sometimes be color-coded, and their corresponding terminals shall be labeled. Notice down the wire shade and its matching terminal, as you will want this info when reconnecting the thermostat later.
Flip Off the Energy
For security causes, flip off the facility to the thermostat from the breaker panel. This can reduce off {the electrical} provide to the thermostat, stopping any electrical shocks or brief circuits.
Take away the Faceplate
Find the faceplate of the thermostat and gently pull it away from the bottom. This can expose the wiring terminals and the wires linked to them.
Disconnect the Wires
Utilizing a small screwdriver or needle-nose pliers, fastidiously launch the wires from their terminals. Be light and keep away from utilizing extreme pressure, as this might harm the wires or the thermostat. As soon as all of the wires have been disconnected, you may take away the thermostat base from the wall.
| Wire Shade | Terminal |
|---|---|
| Purple | R |
| Blue | C |
| Inexperienced | G |
| Yellow | Y |
| Black | W |
Unscrewing the Baseplate
Lastly, it is time to unscrew the baseplate. That is the metallic plate that the thermostat is mounted on. To take away it, you may want to make use of a screwdriver to loosen the 2 screws which might be positioned on both facet of the thermostat. As soon as the screws are unfastened, it’s best to be capable to pull the baseplate straight off the wall. If the baseplate is caught, you may strive utilizing a putty knife to softly pry it off.
As soon as the baseplate is eliminated, you may have to disconnect the wires which might be linked to the thermostat. To do that, merely pull the wires straight out of the terminals. As soon as the wires are disconnected, you may take away the thermostat from the wall.
This is a extra detailed information to unscrewing the baseplate:
- Find the 2 screws on both facet of the thermostat. These screws are positioned close to the underside of the thermostat, and they’re sometimes coated by a small plastic cap.
- Use a screwdriver to loosen the screws. Watch out to not overtighten the screws, as this might harm the thermostat.
- As soon as the screws are unfastened, pull the baseplate straight off the wall. If the baseplate is caught, you may strive utilizing a putty knife to softly pry it off.
| Step | Directions |
|---|---|
| 1 | Find the 2 screws on both facet of the thermostat. |
| 2 | Use a screwdriver to loosen the screws. |
| 3 | As soon as the screws are unfastened, pull the baseplate straight off the wall. |
Eradicating the Thermostat from the Wall
1. Flip off the facility to the thermostat. This may be finished by flipping the breaker that controls the thermostat or by eradicating the batteries from the thermostat.
2. Take away the faceplate of the thermostat. To do that, gently pry the faceplate off of the thermostat with a flathead screwdriver or a putty knife.
3. Disconnect the wires from the thermostat. There are normally 4 wires which might be linked to the thermostat: a crimson wire, a white wire, a inexperienced wire, and a yellow wire. To disconnect the wires, merely unscrew the screws which might be holding them in place.
4. Take away the thermostat from the wall. As soon as the wires are disconnected, you may take away the thermostat from the wall. To do that, merely pull the thermostat straight off of the wall.
Notice: If the thermostat is connected to the wall with screws, you will want to take away the screws earlier than you may take away the thermostat.
| Wire Shade | Function |
|---|---|
| Purple | Energy |
| White | Heating |
| Inexperienced | Cooling |
| Yellow | Fan |
5. Wrap the wires with electrical tape. As soon as the thermostat is faraway from the wall, it’s best to wrap the wires with electrical tape to stop them from shorting out.
6. Retailer the thermostat in a protected place. As soon as the thermostat is faraway from the wall, it’s best to retailer it in a protected place till you might be prepared to put in it once more.
Putting in the New Thermostat
After getting eliminated your Nest thermostat, it is time to set up the brand new one. Listed below are the steps on how you can do it:
- Flip off the facility to your thermostat by turning off the breaker or fuse that controls it.
- Take away the outdated thermostat faceplate by gently pulling it off the wall.
- Disconnect the wires from the outdated thermostat. Make certain to label every wire so you realize the place it goes while you join the brand new thermostat.
- Mount the brand new thermostat baseplate to the wall.
- Join the wires to the brand new thermostat. Make certain to attach the wires to the right terminals on the thermostat. Here’s a desk with the frequent wire colours and their corresponding terminals:
Wire Shade Terminal Purple R White W Inexperienced G Yellow Y Blue C - Connect the thermostat faceplate to the baseplate.
- Activate the facility to your thermostat.
- Set the time and date in your thermostat.
- Check your thermostat to ensure it is working correctly.
- Step 1: Determine the Wires
- Step 2: Join the Wires
- Step 3: Confirm Connections
- Step 4: Mount the Thermostat
- Step 5: Flip On the Thermostat
- Step 6: Troubleshooting Widespread Wiring Points
-
Align the faceplate: Place the faceplate over the thermostat base, guaranteeing that the small magnets on the faceplate align with their corresponding slots on the bottom.
-
Apply light stress: Calmly press on the faceplate till you are feeling it snap into place. Keep away from urgent too exhausting, as you may harm the magnets.
-
Examine for gaps: Examine the perimeters of the faceplate to make sure that there are not any gaps or misalignments. In case you discover any gaps, gently alter the faceplate till they disappear.
-
Safe the screws: Find the 2 small screws on the edges of the faceplate. Utilizing a Phillips-head screwdriver, tighten these screws to safe the faceplate firmly.
-
Exchange the quilt: If the thermostat has a canopy plate, place it over the secured faceplate and press gently till it snaps into place.
-
Activate the thermostat: Press the button on the thermostat base or faceplate to show it on.
-
Check the thermostat: As soon as the thermostat is turned on, test if it is functioning appropriately by adjusting the temperature and observing if it responds accordingly. If the thermostat doesn’t reply or reveals any errors, fastidiously detach the faceplate once more and reverify all connections.
- Use a flathead screwdriver to softly pry the thermostat base plate away from the wall plate.
- Watch out to not harm the thermostat or the wall.
- As soon as the bottom plate is indifferent, you may disconnect the wires and take away the thermostat.
- Flip off the facility to the thermostat on the circuit breaker.
- Watch out to not contact any naked wires.
- If you’re utilizing a ladder, be sure it’s steady and safe.
- Don’t try to take away the thermostat whether it is nonetheless scorching.
- Don’t use any instruments that would harm the thermostat or the encompassing wall.
- When you’ve got any questions, please seek the advice of the Nest Assist web site or name Nest customer support.
- Press and maintain the Again button for five seconds.
- Choose Settings.
- Choose Reset.
- Choose Sure.
- Flip off the facility to the thermostat on the breaker panel.
- Gently pull the thermostat straight off the wall plate.
- Disconnect the wires from the thermostat terminals.
- Take away the mounting plate from the wall.
Reconnecting the Wiring
As soon as the Nest Thermostat has been eliminated, it is time to reconnect the wiring to the baseplate or sub-base. This is an in depth information on how you can do it:
Consult with the label on every wire to determine which terminal it belongs to. Widespread terminals are Y (yellow), W (white), G (inexperienced), R (crimson), C (frequent), and RC (energy). If there is no label, you might have to seek the advice of the wiring diagram supplied by your HVAC system producer.
Insert every wire into the corresponding terminal on the baseplate or sub-base. Make sure that the wire is totally inserted and tightened securely with a screwdriver. Don’t overtighten the screws, as this might harm the terminals.
Use a multimeter to confirm that the wires have been linked appropriately. Flip the facility again on to the HVAC system and test if the thermostat is working correctly. If there are any points, double-check the connections and be certain that the wires are usually not touching one another.
As soon as the wiring has been verified, mount the thermostat again onto the baseplate or sub-base. Align the mounting screws and tighten them securely. Make certain the thermostat is degree and aligned correctly.
Activate the HVAC system and look ahead to the thermostat to energy up. The display screen ought to show the preliminary setup directions. Comply with the on-screen prompts to finish the setup and configure your thermostat settings.
| Situation | Attainable Causes and Options |
|---|---|
| Thermostat Not Turning On | – Wiring not linked appropriately – Confirm wire connections and guarantee they’re safe. – Energy not equipped to the thermostat – Examine if the facility is turned on on the circuit breaker or fuse field. – C wire not linked – In case your system requires a C wire to energy the thermostat, guarantee it’s linked to the C terminal. |
| Incorrect Temperature Readings | – Sensor malfunction – Contact Nest assist for help. – Incorrect wire connections – Confirm wire connections and make sure the Y and C wires are linked to the right terminals. – Defective HVAC system – Have a certified HVAC technician examine and restore the system. |
| Fan Not Operating | – G wire not linked – Make sure the G wire is linked to the G terminal. – Defective wiring or fan motor – Contact an HVAC technician for additional troubleshooting. – System settings not configured appropriately – Examine the thermostat settings and be certain that the fan is ready to run as desired. |
Reattaching the Faceplate
With the thermostat faceplate indifferent, you may have to fastidiously reattach it to make sure that the thermostat operates correctly. This is how you can do it:
Unmount the Thermostat
1. Flip off the facility to the thermostat by flipping the breaker or eradicating the fuse.
2. Grip the thermostat’s base plate and pull it straight towards you to detach it from the wall plate.
3. Disconnect the wires by gently squeezing the connectors and pulling them away from the terminals.
4. Take away the wall plate by unscrewing the mounting screws.
Reset the Thermostat
If the thermostat is malfunctioning, you might have to reset it.
1. Press and maintain the reset button for five seconds.
2. Launch the button and look ahead to the thermostat to restart.
Troubleshooting Widespread Points
If you’re having hassle eradicating the thermostat, listed here are some frequent points and their options:
8. Thermostat is caught
If the thermostat is caught and will not detach from the wall plate, strive these steps:
| Situation | Answer |
|---|---|
| Thermostat is frozen | Watch for the thermostat to thaw after which attempt to take away it. |
| Thermostat is connected to a sub-base | Take away the sub-base earlier than detaching the thermostat. |
| Wires are caught | Use a small screwdriver to softly pry the wires out of the terminals. |
Security Precautions
You will need to observe {that electrical} work could be harmful. If you’re not comfy working with electrical energy, it’s best to seek the advice of a certified electrician. Listed below are some security precautions to bear in mind:
Step 9: Disconnecting the Wires
As soon as the thermostat has been faraway from the wall, it’s time to disconnect the wires. There are 5 wires that have to be disconnected. The wires are color-coded, so it is very important make a remark of which wire goes the place. Here’s a desk with the wire colours and their corresponding terminals:
| Wire Shade | Terminal |
|---|---|
| Purple | R |
| Inexperienced | G |
| White | W |
| Yellow | Y |
| Blue | C |
To disconnect the wires, merely pull them straight out of the terminals. Watch out to not harm the wires or the terminals.
10. Resetting the Thermostat to Manufacturing unit Settings
In some circumstances, you might have to reset the Nest thermostat to its manufacturing unit settings. That is helpful if you happen to’re experiencing any points with the machine or if you happen to’re promoting it. To reset the thermostat to manufacturing unit settings, comply with these steps:
The thermostat will then reset to manufacturing unit settings and restart. You will want to arrange the thermostat once more from scratch.
This is a abstract of the steps to take away a Nest thermostat in a desk format:
| Step | Directions |
|---|---|
| 1 | Flip off the facility to the thermostat. |
| 2 | Take away the faceplate from the thermostat. |
| 3 | Disconnect the wires from the thermostat. |
| 4 | Take away the baseplate from the wall. |
| 5 | Set up the brand new thermostat. |
| 6 | Join the wires to the brand new thermostat. |
| 7 | Set up the faceplate on the brand new thermostat. |
| 8 | Restore energy to the thermostat. |
| 9 | Confirm that the brand new thermostat is working correctly. |
| 10 | Reset the outdated thermostat to manufacturing unit settings (non-compulsory). |
Tips on how to Take away a Nest Thermostat
Eradicating a Nest thermostat is a comparatively easy course of that may be accomplished in a couple of minutes. Listed below are the steps on how you can do it:
As soon as the thermostat is eliminated, you may set up a brand new one or just depart the wires disconnected.
