Changing a pedestal sink could appear to be a frightening process, however it’s truly a comparatively easy plumbing mission that may be accomplished in a number of hours. Earlier than you start, collect your instruments and supplies, together with a brand new pedestal sink, a wrench, a screwdriver, a stage, and a caulk gun. Moreover, you will want to show off the water provide to the sink and drain the water from the sink and tap.
After you have gathered your instruments and supplies, you may start the method of eradicating the outdated sink. First, disconnect the water provide traces from the sink. Then, use a screwdriver to take away the screws that maintain the sink to the wall. Rigorously raise the sink off the pedestal and set it apart. Clear the pedestal and the ground across the sink. Apply a bead of caulk across the base of the pedestal and set the brand new sink on high of the pedestal. Reconnect the water provide traces and activate the water to check for leaks. Lastly, use a stage to make sure that the sink is stage and alter the pedestal as wanted.
Eradicating the Previous Sink
Earlier than eradicating an outdated pedestal sink, it is essential to make sure security. Flip off the water provide valves beneath the sink and open the tap to launch any remaining water.
Disconnecting the Water Traces
- Find the water provide traces: Establish the 2 versatile water traces linked to the sink’s base.
- Use a wrench to loosen the nuts: Flip the nuts counterclockwise with an adjustable wrench or pliers to loosen them.
- Gently pull the traces away: Rigorously slide the traces out from behind the sink, taking care to not injury them.
- Plug the water traces: Insert the included plugs or use rubber caps to seal the open ends of the water traces, stopping water from flowing.
Detaching the Sink from the Pedestal
- Assist the sink: Place one hand beneath the sink’s basin to stop it from crashing down.
- Take away the mounting bolts: Use a screwdriver to unscrew the bolts that connect the sink to the pedestal.
- Carry the sink straight up: Rigorously raise the sink straight up and away from the pedestal.
- Take away the outdated sealant: Use a utility knife or putty knife to take away any outdated caulk or sealant across the sink’s base.
- Clear the pedestal: Wipe down the pedestal with a moist sponge or fabric to arrange it for the brand new sink.
| Instrument | Description |
|---|---|
| Adjustable wrench or pliers | For loosening water provide nuts |
| Screwdriver | For eradicating mounting bolts |
| Utility knife or putty knife | For eradicating outdated sealant |
Making ready the New Sink
Prior to installing the brand new sink, it is advisable put together it. This includes attaching the legs to the basin and putting in the tap. Listed below are the steps on methods to do it:
Attaching the Legs to the Basin
1. Place the sink the wrong way up on a mushy floor, reminiscent of a carpet or towel, to guard the end.
2. Apply a bead of silicone sealant across the base of every leg.
3. Align the legs with the corresponding holes within the basin.
4. Screw the legs into the basin till they’re comfortable. Don’t overtighten.
5. Enable the silicone sealant to dry utterly earlier than continuing.
Putting in the Faucet
1. Insert the tap into the outlet within the sink.
2. Safe the tap with the mounting nuts that got here with the tap.
3. Tighten the nuts till the tap is comfortable. Don’t overtighten.
4. As soon as the tap is put in, join the water provide traces to the tap.
| Instrument | Use |
|---|---|
| Adjustable wrench | Tightening and loosening nuts |
| Silicone sealant | Sealing the bottom of the legs |
| Plumber’s tape | Sealing the threads on the water provide traces |
Putting in the Drain
1. Take away the outdated drain meeting. Use a wrench to loosen the nuts holding the drain meeting in place. As soon as the nuts are unfastened, you may pull the drain meeting out of the sink.
2. Clear the drain gap. As soon as the outdated drain meeting is eliminated, it is advisable clear the drain gap. Use a scrub brush and a few cleansing resolution to take away any dust or particles from the outlet.
3. Set up the brand new drain meeting. Apply a bead of plumber’s putty across the base of the brand new drain meeting. Then, insert the drain meeting into the drain gap and tighten the nuts till they’re comfortable. Make sure that to not overtighten the nuts, as this will injury the drain meeting.
| Instruments you want: |
|---|
| – Adjustable wrench |
| – Putty knife |
| – Plumber’s putty |
| – New drain meeting |
Connecting the Water Provide
Shutting Off the Water Provide
Find the shut-off valves below the sink. If there are none, flip off the principle water valve.
Disconnecting the Water Traces
Utilizing an adjustable wrench, loosen the nuts connecting the water traces to the tap.
Join the New Faucet
Wrap Teflon tape across the threads on the brand new faucet tailpieces. Join the water traces to the tap and hand-tighten the nuts. Use an adjustable wrench to additional tighten, however watch out to not overtighten.
Putting in the Drain Meeting
Place a washer after which the drain flange over the drain gap within the sink. Insert the drain tailpiece into the flange and safe it with a nut.
Test for Leaks
Activate the water provide slowly and test for leaks. For those who discover any, tighten the connections or alter the drain meeting.
Ideas for Connecting the Water Provide
| Downside | Resolution |
|---|---|
| Leaking on the faucet or sink base | Re-tighten the corresponding connections. |
| Leaking on the drain meeting | Modify or tighten the drain flange or nut. |
| Water hammer noise when turning off the tap | Set up water hammer arrestors on the water traces. |
Mounting the Sink on the Pedestal
As soon as the pedestal is in place, it is time to mount the sink. This is methods to do it:
1. Place the Sink on the Pedestal
Rigorously raise the sink and place it on high of the pedestal. Align the sink’s drain gap with the pedestal’s drain gap.
2. Apply Plumber’s Putty
Apply a beneficiant bead of plumber’s putty across the underside of the sink flange, the place it meets the pedestal. This may assist to create a watertight seal.
3. Tighten the Nuts
Attain beneath the pedestal and tighten the nuts that safe the sink to the pedestal. Don’t overtighten the nuts.
4. Set up the Drain Meeting
Insert the drain meeting into the drain gap within the sink and tighten it securely.
5. Set up the Tailpiece and Lure
Join the tailpiece to the drain meeting after which connect the entice to the tailpiece. The entice is a curved pipe that stops sewer gases from escaping into the room.
| Lure Varieties | Description |
|---|---|
| P-Lure | Commonest sort, often product of plastic |
| S-Lure | Much less widespread, sometimes utilized in older houses |
| Steady Lure | One-piece design, straightforward to put in and clear |
Caulking the Base
As soon as the pedestal sink is safe, it is time to caulk the bottom to stop water from seeping beneath and inflicting injury. This is an in depth information:
- Clear the bottom of the sink and the ground completely with a moist fabric to take away any dust or particles.
- Apply painter’s tape alongside the perimeters of the bottom and the ground to create a clear caulk line.
- Load a caulking gun with a mildew-resistant silicone caulk particularly designed for loos.
- Lower the tip of the caulk tube at a 45-degree angle to create a small opening.
- Maintain the caulking gun at a 45-degree angle and apply a steady bead of caulk across the base of the sink, the place it meets the ground.
- Easy out the caulk with a moist finger or caulk instrument to create a clear and even seal. Confer with the desk under for detailed directions on methods to clean out the caulk utilizing totally different instruments:
| Instrument | Directions |
|---|---|
| Finger | Moist your index finger and run it alongside the caulk line, urgent down gently to clean it out. |
| Caulk instrument | Use a plastic or steel caulk instrument to use strain and form the caulk. Maintain the instrument at a 45-degree angle and drag it alongside the caulk line, urgent down firmly. |
| Sponge | Dampen a sponge and squeeze it to create a rounded edge. Run the sponge over the caulk line, making use of gentle strain to clean and form it. |
Take away the painter’s tape instantly after caulking to stop it from sticking to the caulk. Enable the caulk to dry utterly earlier than utilizing the sink.
Putting in the Faucet
Putting in the tap is a simple course of that may be accomplished in a number of steps.
- Collect your supplies. You’ll need the next supplies to put in a faucet: a brand new faucet, a wrench, a screwdriver, and plumbers putty.
- Flip off the water provide to the sink. Find the shut-off valves below the sink and switch them off.
- Disconnect the outdated faucet. Use a wrench to loosen the nuts that maintain the tap in place. As soon as the nuts are unfastened, you may disconnect the tap from the water provide traces.
- Set up the brand new faucet. Place the brand new faucet on the sink and tighten the nuts that maintain it in place.
- Join the water provide traces. Join the water provide traces to the brand new faucet. Make sure that to tighten the nuts securely.
- Set up the aerator. The aerator is the small display screen that’s positioned on the finish of the tap. Set up the aerator on the tap and tighten it securely.
- Activate the water provide and test for leaks. Activate the water provide to the sink and test for leaks. If there are any leaks, tighten the nuts that maintain the tap in place till the leaks cease. Tightening the water provide traces to the tap.
| Step | Motion |
|---|---|
| 1 | Apply a skinny bead of plumbers putty across the base of the water provide traces. |
| 2 | Screw the water provide traces onto the tap. |
| 3 | Tighten the nuts on the water provide traces with a wrench. |
Remaining Touches
8. Join the Drain and Provide Traces
Meticulously join the drain line to the sink drain and tighten with a wrench. Guarantee a comfortable match to stop leaks.
Subsequent, connect the provision traces to the corresponding taps on the sink. Use two adjustable wrenches: one to carry the road and the opposite to tighten the nut.
Tip: To stop cross-threading, evenly apply plumber’s tape to the threads earlier than tightening.
| Chilly Water Provide | Sizzling Water Provide |
|---|---|
| Blue PEX Line or Blue Deal with | Crimson PEX Line or Crimson Deal with |
9. Set up the Faucet
Place the tap over the pre-drilled holes within the sink and insert the mounting bolts from beneath. Safe the tap with the offered nuts and washers. Cosy them up firmly however keep away from overtightening.
10. Seal the Base of the Pedestal
Utilizing a caulk gun, apply a skinny bead of silicone caulk across the base of the pedestal the place it meets the ground. Easy out the caulk with a moist rag or finger.
Troubleshooting Frequent Points
Faucet Leaks
Leaking taps might be attributable to worn-out washers or seals. Attempt tightening the packing nut or changing the washer or seal.
Sink Drain Leaks
Drain leaks can happen on the connection between the drain and sink. Tighten the drain nut or exchange the drain gasket.
Pedestal Cracks
If the pedestal develops cracks, it might should be changed. You may strive repairing small cracks with epoxy, however bigger cracks could require alternative.
Unfastened or Wobbly Sink
A unfastened sink might be attributable to worn-out mounting bolts or a weak pedestal. Tighten the mounting bolts or exchange the pedestal.
Blocked Drain
A blocked drain might be attributable to hair, cleaning soap scum, or different particles. Attempt utilizing a drain cleaner or snaking the drain to take away the blockage.
Sluggish Drain
A sluggish drain might be attributable to a mineral buildup or a clog deeper within the drainpipe. Attempt utilizing a drain cleaner or snaking the drain to clear the blockage.
Discolored Sink
Discoloration might be attributable to mineral deposits or stains. Attempt utilizing a vinegar-based cleaner or a bleach resolution to take away the stains.
Chipped or Scratched Sink
Chipped or scratched sinks might be repaired utilizing a restore equipment or by contacting knowledgeable.
Drain Not Centered
If the drain shouldn’t be centered, it might be because of an improper set up. Make sure that the drain is correctly aligned and tighten the drain nut.
Further Concerns
1. Plumbing Entry
Guarantee you’ve enough entry to the plumbing beneath the sink. If the shut-off valves are tough to achieve or the drainpipe is obstructed, you might have to make extra changes or name a plumber for help.
2. Pedestal Top
Select a pedestal sink with a top that enhances your toilet design and private preferences. Contemplate the peak of the countertop, fixtures, and consumer’s top to make sure a cushty expertise.
3. Drain Sort
Decide the kind of drain required to your sink (pop-up, clicker, or overflow) and make sure the acceptable drain meeting is accessible.
4. Backsplash
If desired, think about including a backsplash to guard the wall behind the sink from water splashes. Select a fabric that enhances the sink and toilet decor.
5. Faucet Sort and Placement
Determine on the kind of faucet (single-handle, two-handle, wall-mounted) and its placement relative to the sink and countertop. Contemplate the attain and performance you want.
6. Overflow Gap
Some sinks have an overflow gap to stop water from overflowing the basin. Guarantee you’ve the suitable drain meeting and stopper to accommodate this characteristic if needed.
7. Cleaning soap Dispenser
Contemplate incorporating a cleaning soap dispenser into your sink design for comfort. Select a dispenser that enhances the sink and toilet fashion.
8. Towel Bar
A towel bar mounted close to the sink can present a handy place to hold towels. Select a towel bar that coordinates with the sink and toilet decor.
9. Shelf
Some pedestal sinks characteristic a built-in shelf for storage. This generally is a helpful addition for organizing toilet gadgets.
10. Self-importance Cupboard
For extra space for storing, think about pairing your pedestal sink with an arrogance cupboard. Select a cupboard that enhances the sink fashion and toilet design, and guarantee it matches comfortably within the obtainable house.
The right way to Change a Pedestal Sink
Changing a pedestal sink is a comparatively easy plumbing mission that may be accomplished in a number of hours. By following these steps, it can save you your self the price of hiring a plumber.
Instruments and supplies you will want:
- New pedestal sink
- Basin wrench
- Adjustable wrench
- Plumber’s putty
- Hacksaw
- Tape measure
- Stage
- Caulk gun
- Caulk
- Utility knife
Directions:
- Flip off the water provide to the sink. That is sometimes accomplished by closing the shut-off valves positioned below the sink.
- Disconnect the water provide traces from the sink. Use a basin wrench to loosen the nuts that join the water provide traces to the sink.
- Disconnect the drainpipe from the sink. Use an adjustable wrench to loosen the nuts that join the drainpipe to the sink.
- Carry the sink off of the pedestal. Watch out to not injury the pedestal or the sink.
- Take away the outdated putty from the rim of the pedestal. Use a utility knife to scrape away the outdated putty.
- Apply a brand new bead of plumber’s putty to the rim of the pedestal. Use your finger to clean out the putty.
- Set the brand new sink on the pedestal. Guarantee that the sink is stage.
- Join the drainpipe to the sink. Tighten the nuts that join the drainpipe to the sink.
- Join the water provide traces to the sink. Tighten the nuts that join the water provide traces to the sink.
- Activate the water provide to the sink. Test for leaks.
- Caulk across the base of the sink. This may assist to stop water from leaking out from below the sink.
Folks Additionally Ask About The right way to Change a Pedestal Sink
Is it tough to switch a pedestal sink?
No, changing a pedestal sink shouldn’t be tough. It’s a mission that may be accomplished in a number of hours by somebody with fundamental plumbing expertise.
What’s the price of changing a pedestal sink?
The price of changing a pedestal sink will fluctuate relying on the kind of sink you select and the price of labor in your space. Nevertheless, you may anticipate to pay between $100 and $300 for a brand new pedestal sink and set up.
How lengthy does it take to switch a pedestal sink?
Changing a pedestal sink sometimes takes between 2 and 4 hours. Nevertheless, the time it takes will fluctuate relying in your talent stage and the complexity of the mission.
