The Honda Silverwing is a well-liked maxi-scooter that has been in manufacturing since 2001. It’s recognized for its snug experience, ample cupboard space, and highly effective engine. Nonetheless, like all automobiles, the Silverwing requires occasional upkeep, and one of the crucial frequent duties is changing the gasoline pump. Whereas this will likely look like a frightening activity, it’s really fairly easy and will be accomplished in a number of hours with the correct instruments and a bit of little bit of know-how.
Step one is to take away the seat and the facet panels. This gives you entry to the gasoline tank and the gasoline pump. After getting entry to the gasoline pump, you have to to disconnect the gasoline traces and {the electrical} connector. As soon as the gasoline pump is disconnected, you may take away it from the gasoline tank. Watch out to not harm the gasoline pump or the gasoline tank when eradicating it.
After getting eliminated the gasoline pump, you may examine it for harm. If the gasoline pump is broken, it would have to be changed. If the gasoline pump is just not broken, you may clear it and reinstall it. To scrub the gasoline pump, you should utilize a carburetor cleaner or a light detergent. As soon as the gasoline pump is clear, you may reinstall it within the gasoline tank. Make sure you join the gasoline traces and {the electrical} connector earlier than reinstalling the gasoline pump. As soon as the gasoline pump is reinstalled, you may substitute the facet panels and the seat.
Figuring out the Location of the Gas Pump
The gasoline pump in a Honda Silverwing is positioned beneath the gasoline tank, making it accessible for inspection and alternative. Listed below are detailed steps on easy methods to determine the situation:
- Take away the Seat: Find the seat launch lever underneath the entrance of the seat and pull it as much as launch the seat. Raise the seat and set it apart.
- Find the Gas Tank: The gasoline tank is the big, silver part positioned above the engine. It has a gasoline line and wiring harness linked to it.
- Disconnect Gas Line and Wiring: Fastidiously disconnect the gasoline line and electrical wiring from the gasoline tank.
Use a wrench to loosen the gasoline line nut and pull the gasoline line off the tank. For {the electrical} wiring, find the connector and press the discharge tab to disconnect it. - Take away the Gas Tank: Grip the gasoline tank on each side and raise it straight up. Watch out to not spill any gasoline throughout this course of.
- Find the Gas Pump: As soon as the gasoline tank is eliminated, you will notice the gasoline pump meeting on the underside of the gasoline tank. It’s sometimes a cylindrical or square-shaped part with gasoline traces and electrical connectors connected to it.
| Merchandise | Description |
|---|---|
| Gas Tank | The massive, silver part positioned above the engine |
| Gas Pump | The cylindrical or square-shaped part positioned on the underside of the gasoline tank |
| Gas Line | The hose that connects the gasoline pump to the gasoline tank |
| Electrical Wiring | The wires that join the gasoline pump to {the electrical} system |
Getting ready the Motorbike for Upkeep
Security Precautions
Earlier than starting any upkeep, guarantee your security by sporting correct protecting gear and dealing in a well-ventilated space. Permit the engine to chill fully to forestall burns.
Instruments and Supplies Required
- Socket wrench set
- Screwdriver set
- Funnel
- Drain pan
Detailed Directions for Eradicating the Gas Pump
To entry the gasoline pump, observe these steps:
1. Disconnect the Battery
Find the battery and disconnect the detrimental terminal to forestall electrical hazards.
2. Take away the Gas Tank
Unscrew the gasoline tank mounting bolts and punctiliously raise the tank off the bike. Assist the tank with a stand or place heavy objects round it to forestall tipping. Use this chance to examine the gasoline traces and connections for any harm or leaks.
| Gas Tank Mounting Bolt Location | Bolt Removing Method |
|---|---|
| Beneath the tank, close to the seat | Use a socket wrench to loosen the bolts |
| Beside the gasoline cap | Use a screwdriver to take away the bolts |
3. Find the Gas Pump
With the gasoline tank eliminated, you will notice the gasoline pump meeting mounted on the left facet of the engine. It’s sometimes lined by a protecting cowl or housing.
Disassembly of the Rear Fairings
1. Begin by eradicating the rearmost seat part. That is often held in place by a few bolts, which will be loosened with a socket wrench. As soon as the bolts are eliminated, raise the seat part off and set it apart.
2. Now, take away the rear facet fairings. These are sometimes held in place by a mix of bolts and clips. First, take away the bolts which can be seen alongside the highest and sides of the fairings. Then, rigorously pry the fairings away from the bike, beginning on the backside and dealing your means up. Watch out to not harm the fairings or the clips that maintain them in place.
3. Eradicating the Gas Pump Cowl
3. As soon as the facet fairings are eliminated, you will notice the gasoline pump cowl. It is a black plastic cowl that’s positioned on the left facet of the bike, slightly below the gasoline tank. To take away the quilt, you have to to take away the 4 bolts that maintain it in place. These bolts are positioned on the highest and backside of the quilt.
As soon as the bolts are eliminated, rigorously raise the quilt off and set it apart. You’ll now have entry to the gasoline pump.
| Bolt Dimension | Location |
|---|---|
| 8mm | Prime of canopy |
| 10mm | Backside of canopy |
Removing of the Airbox and Throttle Our bodies
**1. Disconnect the battery.** That is at all times step one when engaged on any electrical part in your bike. Find the detrimental battery terminal and loosen the nut that secures the cable. Take away the cable from the terminal.
**2. Take away the seat.** The seat is held in place by two bolts on the rear of the seat. Loosen the bolts and raise the seat off of the bike.
**3. Take away the airbox cowl.** The airbox cowl is positioned on the entrance of the airbox. It’s held in place by 4 bolts. Take away the bolts and raise the quilt off of the airbox.
**4. Take away the airbox.** The airbox is held in place by 4 bolts. Take away the bolts and raise the airbox out of the bike. You could must disconnect the air consumption hose from the airbox with a purpose to take away it.
a. Disconnect the throttle cables from the throttle our bodies.
b. Take away the bolts that safe the throttle our bodies to the consumption manifold.
c. Fastidiously raise the throttle our bodies off of the consumption manifold. Watch out to not harm the throttle place sensor or the injector.
**5. Take away the throttle our bodies.** The throttle our bodies are held in place by 4 bolts. Take away the bolts and raise the throttle our bodies off of the consumption manifold.
Disconnecting the Gas Strains
As soon as the gasoline tank is eliminated, you have to to disconnect the gasoline traces from the gasoline pump. There are two gasoline traces linked to the gasoline pump: the provision line and the return line. The availability line is the bigger of the 2 traces and is linked to the highest of the gasoline pump. The return line is the smaller of the 2 traces and is linked to the underside of the gasoline pump.
To disconnect the gasoline traces, use a pair of pliers to squeeze the discharge tabs on the gasoline line connectors. As soon as the discharge tabs are squeezed, pull the gasoline line connectors off of the gasoline pump. Watch out to not harm the gasoline traces or the gasoline pump when disconnecting the gasoline traces.
As soon as the gasoline traces are disconnected, you may take away the gasoline pump from the bike.
Relieving Gas Stress
Earlier than disconnecting the gasoline traces, you will need to relieve the gasoline stress within the gasoline system. To do that, begin the engine and let it idle for a couple of minutes. Then, flip off the engine and disconnect the detrimental battery terminal.
Security Precautions
When engaged on the gasoline system, you will need to take the next security precautions:
- Work in a well-ventilated space.
- Put on eye safety and gloves.
- Don’t smoke or work close to open flames.
- Have a fireplace extinguisher close by.
Components Identification
The next desk identifies the elements of the gasoline pump and gasoline traces:
| Half | Description |
|---|---|
| Gas pump | The gasoline pump is a small, electrical pump that provides gasoline to the engine. |
| Provide line | The availability line is the bigger of the 2 gasoline traces and is linked to the highest of the gasoline pump. |
| Return line | The return line is the smaller of the 2 gasoline traces and is linked to the underside of the gasoline pump. |
Detaching the Gas Tank
To entry the gasoline pump, you have to first detach the gasoline tank. Comply with these steps:
- Disconnect the gasoline line from the tank. You could want a pair of pliers to loosen the hose clamp.
- Find the gasoline tank bolts, sometimes positioned on the edges and entrance of the tank.
- Take away the gasoline tank bolts utilizing a socket wrench.
- Fastidiously raise the gasoline tank up and away from the bike.
- Set the gasoline tank apart in a secure place.
- Disconnect {the electrical} connectors from the gasoline pump. There could also be a number of connectors, so be sure you disconnect all of them.
Eradicating the Gas Pump
- Find the gasoline pump mounting bolts, sometimes positioned on the underside of the gasoline pump.
- Take away the gasoline pump mounting bolts utilizing a socket wrench.
- Gently pull the gasoline pump out of the tank.
- Examine the gasoline pump for any harm or particles.
- If needed, substitute the gasoline pump with a brand new one.
- Reinstall the gasoline pump within the reverse order of removing.
After getting changed or inspected the gasoline pump, you may reattach the gasoline tank by following the steps in reverse order.
Inspecting the Gas Pump Location
Finding the gasoline pump on a Honda Silverwing requires a radical inspection of the gasoline system. This is an in depth information on easy methods to proceed:
1. Security Precautions
Earlier than commencing any work, make sure the automobile is parked on a secure floor and the engine is turned off.
2. Find the Gas Tank
Determine the gasoline tank, which is often located underneath the rider’s seat. Take away any panels or bolts that safe it to entry the gasoline pump.
3. Disconnect the Gas Strains
Find and disconnect the gasoline traces linked to the gasoline pump. Use warning as gasoline could spill.
4. Take away the Gas Pump Meeting
Unscrew the bolts or clips holding the gasoline pump meeting in place. Fastidiously raise the meeting out of the gasoline tank.
5. Examine the Gas Pump
Study the gasoline pump for any seen harm or corrosion. Confirm its electrical connections and guarantee they’re safe.
6. Take a look at the Gas Pump
If potential, join the gasoline pump to an influence supply and check its performance by listening for a buzzing sound or observing gasoline circulation.
7. Examine the Gas Filter (Optionally available)
Many Honda Silverwing fashions have an inline gasoline filter positioned close to the gasoline pump. Examine the filter for clogs or particles and substitute it if needed.
| Gas Filter Inspection Steps: |
|---|
| – Disconnect the gasoline filter from the gasoline traces. |
| – Examine for dust or particles contained in the filter. |
| – Use compressed air or a gasoline injector cleaner to scrub the filter. |
| – If the filter is clogged or broken, substitute it with a brand new one. |
Reconnecting Elements
After changing the gasoline pump, it is time to reconnect the varied parts you disconnected earlier. Begin by reattaching the gasoline pump to the gasoline tank. Use the bolts you eliminated earlier to safe it in place. As soon as the gasoline pump is in place, reconnect the gasoline traces. Be sure the traces are securely connected and there aren’t any leaks. Subsequent, reconnect {the electrical} connectors to the gasoline pump. Lastly, reattach the seat and some other parts you eliminated throughout the course of.
8. Reattaching the Gas Tank
When reattaching the gasoline tank, be sure you use a brand new gasket to make sure a correct seal. Begin by aligning the tank over the body after which rigorously decrease it into place. As soon as the tank is in place, safe it with the bolts you eliminated earlier. Subsequent, reconnect the gasoline traces and electrical connectors to the tank. Lastly, reattach the seat and some other parts you eliminated throughout the course of.
Extra Suggestions
Listed below are some extra ideas for changing the gasoline pump:
- Use a clear work space to keep away from contaminating the brand new gasoline pump.
- Take your time and observe the directions rigorously.
- If you happen to’re not snug working in your automobile, do not hesitate to take it to a professional mechanic.
Testing the Gas Pump Operation
To check the gasoline pump operation, you have to a multimeter and a jumper wire.
- Disconnect the detrimental battery terminal.
- Find the gasoline pump relay.
- Take away the gasoline pump relay from its socket.
- Join one finish of the jumper wire to the optimistic terminal of the battery.
- Join the opposite finish of the jumper wire to the terminal on the gasoline pump relay that’s linked to the gasoline pump.
- Flip the ignition key to the “on” place.
- Pay attention for the gasoline pump to run.
- If the gasoline pump doesn’t run, verify the fuse for the gasoline pump.
- If the fuse is sweet, substitute the gasoline pump.
Extra Troubleshooting Suggestions
| Symptom | Doable Trigger | Answer |
|---|---|---|
| Engine begins and runs for a number of seconds, then dies | Gas pump is just not delivering sufficient gasoline | Exchange the gasoline pump |
| Engine begins and runs, however hesitates or stalls underneath load | Gas pump is just not delivering sufficient gasoline | Exchange the gasoline pump |
| Engine doesn’t begin | Gas pump is just not delivering any gasoline | Examine the gasoline pump fuse. If the fuse is sweet, substitute the gasoline pump |
Honda Silverwing: Accessing the Gas Pump With out Removing
Accessing the gasoline pump on a Honda Silverwing requires some mechanical data and the correct instruments.
To start, find the gasoline tank launch lever and raise the tank to reveal the gasoline traces and electrical connectors. Disconnect these parts rigorously.
Subsequent, determine the gasoline filter, which is positioned close to the underside of the gasoline tank. Disconnect the gasoline traces from the filter and take away the filter meeting.
With the gasoline filter eliminated, you should have entry to the gasoline pump. The pump is held in place by a sequence of bolts or screws. Fastidiously take away these fasteners and raise the gasoline pump out of the tank.
When changing the gasoline pump, be sure you use a brand new gasket or O-ring to make sure a correct seal. Tighten the bolts or screws securely and reconnect the gasoline traces and electrical connectors.
Lastly, decrease the gasoline tank again into place and reconnect the gasoline tank launch lever.
Individuals Additionally Ask
How troublesome is it to alter the gasoline pump on a Honda Silverwing?
The problem of fixing the gasoline pump on a Honda Silverwing is dependent upon your mechanical abilities and expertise. In case you are not snug working by yourself bike, it’s best to depart it to knowledgeable mechanic.
What instruments do I want to alter the gasoline pump on a Honda Silverwing?
You will want a set of screwdrivers, a wrench, and a pair of pliers to alter the gasoline pump on a Honda Silverwing. You might also want a gasoline filter wrench to take away the gasoline filter.
Can I exploit any gasoline pump for my Honda Silverwing?
No, it is best to solely use a gasoline pump that’s particularly designed in your specific mannequin of Honda Silverwing. Utilizing the flawed gasoline pump can harm your bike.
