If you’re planning on buying a case on your iPad, you will need to know the right dimension. The identical goes if you happen to simply wish to know the mannequin of your iPad. There are just a few other ways to measure the scale of your iPad, relying on whether or not you’ve got the gadget readily available or not. On this article, we’ll give you step-by-step directions on how one can measure the scale of your iPad, whatever the mannequin.
In case you have your iPad readily available, the simplest approach to measure the scale is to make use of a ruler or measuring tape. Measure the size and width of the iPad, from edge to edge. The size is the measurement from the highest to the underside of the iPad, whereas the width is the measurement backward and forward. After you have the size and width, you should utilize the next desk to find out the scale of your iPad:
| Size (in) | Width (in) | Measurement |
|---|---|---|
| 9.7 | 7.0 | 9.7-inch iPad |
| 10.2 | 7.5 | 10.2-inch iPad (seventh and eighth era) |
| 10.5 | 7.9 | 10.5-inch iPad Professional |
| 11.0 | 8.1 | 11-inch iPad Professional (1st, 2nd, and third era) |
| 12.9 | 8.7 | 12.9-inch iPad Professional (1st, 2nd, third, 4th, and fifth era) |
Measuring the Bodily Dimensions
Earlier than discussing the technical dimensions of an iPad, it is important to grasp the bodily measurements. These dimensions straight affect the gadget’s portability, consolation of use, and compatibility with equipment. This is an in depth information on measuring the bodily dimensions of an iPad.
1. Size and Width
To measure the size and width of the iPad, you may want a ruler or measuring tape. Place the ruler alongside the gadget’s longest aspect, from one edge to the opposite. Document the measurement in inches or centimeters. Repeat the method for the width, which is the shorter aspect perpendicular to the size. The size usually corresponds to the peak of the iPad when held in portrait mode, whereas the width corresponds to the width in portrait mode or the peak in panorama mode.
2. Peak
The peak of an iPad is measured by putting the gadget on a flat floor with the display screen going through up. Use a ruler or measuring tape to measure from the underside edge to the highest fringe of the gadget. This measurement is often taken when the iPad is in portrait mode. The peak is essential for figuring out the gadget’s total dimension and for making certain compatibility with circumstances and docks.
3. Thickness
To measure the thickness, place the iPad on its aspect and use a ruler or caliper to measure from the highest edge to the underside edge. This measurement is mostly taken on the thickest level of the gadget, which can fluctuate relying on the mannequin and design. The thickness can affect the gadget’s portability and luxury of holding it for prolonged intervals.
Calculating the Display screen Measurement Diagonally
The most typical methodology for measuring the scale of an iPad is to calculate the display screen dimension diagonally. That is carried out by measuring the space from one nook of the display screen to the other nook. The result’s the diagonal size of the display screen, which is often expressed in inches.
To calculate the display screen dimension diagonally, you’ll need a ruler or measuring tape. Place the ruler or measuring tape alongside the diagonal of the display screen, from one nook to the other nook. Ensure that the ruler or measuring tape is straight and that it isn’t touching the bezel of the display screen.
After you have measured the diagonal size of the display screen, you should utilize the next desk to find out the scale of your iPad:
| Diagonal Size (inches) | iPad Mannequin |
|---|---|
| 7.9 | iPad mini |
| 9.7 | iPad (2018) |
| 10.2 | iPad (2021) |
| 10.5 | iPad Air (2019) |
| 11 | iPad Professional (2018) |
| 12.9 | iPad Professional (2018) |
Figuring out the Facet Ratio
To find out the facet ratio of an iPad, you should measure the display screen’s width and peak. The facet ratio is often expressed as a ratio of the width to peak, reminiscent of 4:3 or 16:9. Listed below are detailed steps on how one can measure the iPad’s display screen dimensions:
-
Measure the Width
Use a ruler or measuring tape to measure the horizontal distance throughout the iPad display screen from the left edge to the fitting edge. Document this measurement in millimeters (mm) or inches (in).
-
Measure the Peak
Subsequent, measure the vertical distance from the highest fringe of the iPad display screen to the underside edge. Document this measurement in mm or in.
-
Calculate the Facet Ratio
Divide the width measurement by the peak measurement to acquire the facet ratio. For instance, if the width is 240 mm and the peak is 160 mm, then the facet ratio can be 240/160 = 3:2.
The next desk summarizes the facet ratios of various iPad fashions:
iPad Mannequin Facet Ratio iPad (1st era) 4:3 iPad 2 4:3 iPad 3 4:3 iPad 4 4:3 iPad Air 4:3 iPad Air 2 4:3 iPad Professional (9.7-inch) 4:3 iPad Professional (10.5-inch) 4:3 iPad Professional (11-inch) 4:3 iPad Professional (12.9-inch) 4:3
Using On-line Instruments for Accuracy
There are quite a few on-line instruments that may present fast and correct measurements on your iPad. These instruments usually require you to enter the mannequin or dimensions of your gadget. Listed below are just a few standard choices:
| Device | Options |
|---|---|
| Apple Help | Official measurements offered by Apple |
| Speccy | Detailed {hardware} info, together with gadget dimensions |
| iFixit Restore Guides | Detailed measurements and directions for gadget repairs |
To make use of these instruments, merely go to the web site and enter the mannequin or dimensions of your iPad. The device will then give you the corresponding measurements.
Utilizing a Bodily Ruler or Measuring Tape
In the event you desire a extra hands-on method, you should utilize a bodily ruler or measuring tape to measure your iPad. To do that, place the ruler or tape alongside the sting of the gadget and browse the measurement. Make sure that you measure from the sting of the display screen to the sting of the gadget, together with any bezels or frames.
Contemplating the Facet Ratio
When measuring the scale of your iPad, it is also essential to think about the facet ratio. This refers back to the ratio of the width to the peak of the display screen. For instance, an iPad with a 4:3 facet ratio could have a special display screen dimension than an iPad with a 16:9 facet ratio, even when they’ve the identical diagonal measurement.
Further Suggestions for Correct Measurement
* Use a high-quality ruler or measuring tape for exact measurements.
* Measure from the middle of the display screen to keep away from any distortion.
* If doable, use a device that gives measurements in each inches and centimeters.
* Examine your measurements with the official Apple specs to make sure accuracy.
Assessing the Decision
The decision of an iPad, measured in pixels, refers back to the variety of particular person pixels displayed on its display screen. Larger resolutions lead to sharper and extra detailed photographs. To measure the decision of an iPad, observe these steps:
- Navigate to the “Settings” app in your iPad.
- Faucet on “Show & Brightness”.
- Scroll right down to the “Decision” part.
- The present decision of your iPad will likely be displayed right here.
- Faucet on “Extra Resolutions” to see an inventory of other resolutions out there on your gadget.
- Measure the peak from the highest of the show to the underside.
- Measure the width from the left fringe of the show to the fitting edge.
- Measure the thickness at its thickest level, often alongside the aspect the place the buttons are positioned.
- Millimeters to inches: To transform millimeters to inches, multiply the variety of millimeters by 0.0393701.
- Centimeters to inches: To transform centimeters to inches, multiply the variety of centimeters by 0.393701.
- Ft to inches: To transform toes to inches, multiply the variety of toes by 12.
- Obtain and set up the applying from the App Retailer.
- Open the applying and observe the directions on the display screen.
- Level the gadget’s digital camera at your iPad.
- Measure the size, width, and peak of your iPad utilizing the app’s instruments.
The out there resolutions for every iPad mannequin fluctuate relying on its display screen dimension and {hardware} capabilities. Some widespread resolutions for iPads embody:
| iPad Mannequin | Decision |
|---|---|
| iPad (ninth era) | 10.2 inches, 2160 x 1620 pixels |
| iPad Air (fifth era) | 10.9 inches, 2360 x 1640 pixels |
| iPad Professional 12.9-inch (sixth era) | 12.9 inches, 2732 x 2048 pixels |
Checking the General Dimensions
To precisely measure the general dimensions of your iPad, seek advice from the official specs offered by Apple or seek advice from the consumer guide that got here together with your gadget. The scale fluctuate relying on the precise iPad mannequin and era.
This is a desk offering the general dimensions for the most recent generations of iPad fashions:
| Mannequin | Peak | Width | Thickness |
|---|---|---|---|
| iPad Professional 12.9-inch (fifth era) | 11.04 inches (280.6 mm) | 8.46 inches (214.9 mm) | 0.25 inches (6.36 mm) |
| iPad Professional 11-inch (third era) | 9.74 inches (247.6 mm) | 7.02 inches (178.5 mm) | 0.23 inches (5.9 mm) |
| iPad Air (fifth era) | 9.76 inches (247.6 mm) | 7.03 inches (178.5 mm) | 0.24 inches (6.1 mm) |
| iPad mini (sixth era) | 7.69 inches (195.4 mm) | 5.30 inches (134.8 mm) | 0.28 inches (7.2 mm) |
When measuring the scale, preserve the next in thoughts:
Understanding Show Phrases
Show dimension: Measured diagonally from nook to nook, excluding any rounded edges or bezels (ie. the body across the display screen). Show dimension is often expressed in inches.
Facet ratio: The ratio of the show’s width to its peak. Frequent facet ratios embody 4:3 (sq.), 16:9 (widescreen), and 16:10 (wider than widescreen).
Decision: The variety of pixels displayed on the display screen. Decision is often expressed by way of the variety of pixels within the horizontal route by the variety of pixels within the vertical route (e.g., 1920×1080).
Pixel density: The variety of pixels per inch (PPI) of the show. Pixel density impacts the readability and sharpness of the picture, with larger pixel densities leading to sharper photographs.
Shade depth: The variety of bits used to signify every pixel’s colour. Shade depth impacts the vary and accuracy of colours that may be displayed, with larger colour depths leading to extra vibrant and correct colours.
Show kind: The kind of expertise used to show the picture, reminiscent of LCD (liquid crystal show), OLED (natural light-emitting diode), or IPS (in-plane switching). Completely different show sorts provide completely different benefits and drawbacks by way of picture high quality, colour accuracy, and viewing angles.
Retina show: A high-resolution show with a pixel density that’s excessive sufficient that the person pixels should not seen to the human eye at a typical viewing distance. Retina shows present sharp and clear photographs which might be simple on the eyes.
| Show Measurement (inches) | Facet Ratio | Decision | Pixel Density (PPI) |
|---|---|---|---|
| 9.7 | 4:3 | 1024 x 768 | 264 |
| 10.2 | 4:3 | 1024 x 768 | 326 |
| 10.5 | 4:3 | 1668 x 2224 | 265 |
| 10.9 | 4:3 | 1668 x 2388 | 264 |
| 12.9 | 4:3 | 2048 x 2732 | 265 |
| 11 | 16:10 | 2388 x 1668 | 265 |
| 12.4 | 16:10 | 2560 x 1600 | 265 |
Changing Items of Measurement
In the event you’re extra snug measuring with completely different items than inches or centimeters, you possibly can simply convert your iPad’s dimensions utilizing the next desk:
| Unit | Conversion Issue to Inches |
|---|---|
| Millimeters (mm) | 0.0393701 |
| Centimeters (cm) | 0.393701 |
| Ft (ft) | 12 |
For instance, to transform the iPad Professional 12.9-inch mannequin’s peak of 11.04 inches to millimeters, you’d multiply 11.04 by 25.4 (the variety of millimeters in an inch), which provides you 280.44 millimeters.
This is an in depth rationalization of the conversions:
By following these directions, you possibly can simply measure the scale of your iPad in any unit of measurement you like.
Utilizing Third-Celebration Functions
A number of third-party purposes can be found that may enable you measure the scale of your iPad. One standard possibility is the Measure app, which is offered free of charge on the App Retailer. This app means that you can measure the size, width, and peak of your iPad utilizing the gadget’s digital camera. Another choice is the Ruler app, which can also be out there free of charge on the App Retailer. This app gives quite a lot of measuring instruments, together with a ruler, a protractor, and a tape measure. To make use of a third-party utility to measure the scale of your iPad:
The next desk summarizes the important thing options of the 2 hottest third-party purposes for measuring the scale of an iPad:
| Characteristic | Measure | Ruler |
|---|---|---|
| Value | Free | Free |
| Instruments | Ruler, protractor, tape measure | Ruler, protractor, tape measure |
| Digicam | Sure | Sure |
| Accuracy | Excessive | Excessive |
Evaluating to Different Gadget Sizes
When evaluating the scale of an iPad to different gadgets, it is useful to think about the scale of widespread sizes. This is a desk displaying the scale of assorted iPad sizes and their comparability to different gadgets:
| Gadget | Show Measurement (inches) | Dimensions (inches) |
|---|---|---|
| iPad mini (sixth era) | 8.3 | 7.9 x 5.3 x 0.24 |
| iPad (ninth era) | 10.2 | 9.8 x 6.8 x 0.29 |
| iPad Air (fifth era) | 10.9 | 9.7 x 7 x 0.24 |
| iPad Professional 11-inch (4th era) | 11.0 | 9.7 x 7 x 0.23 |
| iPad Professional 12.9-inch (sixth era) | 12.9 | 11 x 8.5 x 0.25 |
| iPhone 14 Professional | 6.1 | 5.8 x 2.8 x 0.31 |
| Samsung Galaxy S23+ | 6.6 | 6.2 x 3 x 0.31 |
| MacBook Air (M2) | 13.6 | 11.97 x 8.36 x 0.44 |
| MacBook Professional 14-inch (M2) | 14.2 | 12.31 x 8.91 x 0.61 |
As you possibly can see, iPads are available a variety of sizes, from the compact iPad mini to the bigger iPad Professional. When selecting the best dimension on your wants, take into account what actions you may be utilizing the gadget for. In the event you’re primarily utilizing it for studying, looking the net, or watching movies, a smaller iPad could also be adequate. Nonetheless, if you happen to’re planning on utilizing it for extra intensive duties like gaming or video modifying, a bigger iPad with a better decision show could also be a more sensible choice.
Methods to Measure Measurement of iPad
To measure the scale of an iPad, it’s good to decide the diagonal display screen dimension. This measurement is often given in inches and represents the space from one nook of the display screen to the other nook diagonally.
To measure the diagonal display screen dimension, you should utilize a ruler or tape measure. Place the ruler or tape measure alongside the diagonal of the display screen, making certain that it runs from one nook to the other nook. The measurement you acquire would be the diagonal display screen dimension of the iPad.
For instance, if you happen to measure the diagonal display screen dimension of an iPad and acquire a measurement of 9.7 inches, then the iPad has a 9.7-inch display screen.
Individuals Additionally Ask
Methods to measure iPad peak and width?
To measure the peak and width of an iPad, you should utilize the next steps:
1. Place the iPad on a flat floor.
2. Use a ruler or measuring tape to measure the space from the highest fringe of the iPad to the underside edge. This provides you with the peak of the iPad.
3. Subsequent, measure the space from the left fringe of the iPad to the fitting edge. This provides you with the width of the iPad.
