In case you’re trying to take away your Google Nest Doorbell, whether or not it is for alternative, relocation, or just to troubleshoot a difficulty, the method is comparatively easy. This information will stroll you thru the mandatory steps to soundly and successfully detach your doorbell from its mounting bracket, guaranteeing a easy and hassle-free elimination.
Earlier than you start, guarantee you’ve gotten the suitable instruments for the duty. You’ll sometimes want a Phillips-head screwdriver, a flathead screwdriver, or a drill relying on the mannequin of your doorbell. Moreover, it is advisable to put on security glasses for eye safety through the elimination course of.
To provoke the elimination, find the small screw located on the backside of the doorbell’s faceplate. Utilizing the suitable screwdriver, fastidiously loosen and take away this screw. As soon as the screw has been eliminated, gently pull the faceplate in the direction of you, releasing it from the doorbell’s mounting bracket. Nevertheless, keep away from pulling too forcefully, as there could also be further wires or connections that have to be indifferent first. Proceed to the following step to soundly disconnect these elements and absolutely take away your Google Doorbell.
Disconnect the Energy Provide
Earlier than you start any work in your doorbell, it is important to disconnect the ability provide to forestall electrical shock or injury to the machine. Here is a step-by-step information to soundly disconnect the ability to your Google doorbell:
Shut Off the Circuit Breaker
Find your private home’s electrical panel and determine the circuit breaker that powers the doorbell. Flip off the circuit breaker by flipping the change to the “Off” place. This can lower off the electrical energy provide to the doorbell.
Take away the Faceplate
As soon as the circuit breaker is off, fastidiously take away the doorbell’s faceplate utilizing a screwdriver or different applicable device. The faceplate is usually held in place by just a few screws or clips.
Disconnect the Wires
Contained in the doorbell cavity, you will notice two wires linked to the doorbell’s terminals. These wires carry {the electrical} present to the doorbell. Utilizing a pair of needle-nose pliers, gently pull the wires off the terminals. Be certain to not contact any uncovered wires or steel elements to keep away from electrical shock.
As soon as the wires are disconnected, the ability provide to your Google doorbell is safely eliminated. Now you can proceed together with your work on the doorbell with out worrying about electrical hazards.
| Step | Motion |
|---|---|
| 1 | Shut off the circuit breaker |
| 2 | Take away the faceplate |
| 3 | Disconnect the wires |
Unscrew the Doorbell Unit
Upon getting gathered the mandatory instruments, you’ll be able to proceed to unscrew the doorbell unit. Comply with these steps fastidiously:
Disconnect the Energy:
Earlier than touching any wires, be certain that the doorbell is disconnected from energy. Find the circuit breaker or fuse field in your house and switch off the ability for the doorbell circuit. You may also disconnect the wires immediately on the doorbell unit in case you are snug doing so.
Take away the Faceplate:
The faceplate is the ornamental cowl that goes over the doorbell unit. It’s normally held in place by screws or clips. Use a screwdriver or your fingers to fastidiously take away the faceplate.
Disconnect the Wires:
As soon as the faceplate is eliminated, you will notice the wires that join the doorbell unit to the ability provide and the chime or speaker. Use a screwdriver or needle-nose pliers to disconnect the wires. Pay attention to which wires connect with which terminals so that you could reconnect them appropriately later.
Unscrew the Doorbell Unit:
Find the screws that maintain the doorbell unit in place. Use a screwdriver to take away these screws and gently pull the doorbell unit away from the wall. Watch out to not injury the wires or the wall.
Take away the Mounting Plate (Optionally available):
Some doorbell models include a mounting plate that’s screwed into the wall. In case your doorbell unit has a mounting plate, use a screwdriver to take away the screws and take off the plate as effectively.
Take away the Battery (For Battery-Powered Doorbells):
You probably have a battery-powered doorbell, take away the battery from the unit. This can forestall any remaining energy from discharging and inflicting injury.
Take away the Mounting Bracket
To take away the mounting bracket, first use a screwdriver to take away the 2 screws that safe it to the wall. As soon as the screws are eliminated, fastidiously pull the bracket away from the wall. If the bracket is tough to take away, you’ll be able to attempt utilizing a putty knife or a flathead screwdriver to softly pry it off.
Disconnect the Wires
As soon as the mounting bracket is eliminated, you will have to disconnect the wires which can be linked to the doorbell. To do that, merely use your fingers to softly pull the wires out of the terminals. If the wires are tough to take away, you’ll be able to attempt utilizing a pair of pliers.
Take away the Doorbell
With the wires disconnected, now you can take away the doorbell from the mounting bracket. To do that, merely pull the doorbell straight down. If the doorbell is tough to take away, you’ll be able to attempt utilizing a flathead screwdriver to softly pry it off.
Take away the Doorbell Digital camera from the Bracket
To take away the doorbell digicam from the bracket, comply with these steps:
1. Take away the faceplate
Use a small flathead screwdriver to softly pry off the faceplate from the entrance of the doorbell. The faceplate is held in place by two small screws.
2. Disconnect the wires
As soon as the faceplate is eliminated, you will notice two wires linked to the again of the doorbell digicam. Disconnect these wires by gently pulling them away from the digicam.
3. Take away the mounting screw
There’s a single mounting screw positioned on the backside of the doorbell digicam. Use a Phillips head screwdriver to take away this screw.
4. Take away the digicam from the bracket
As soon as the mounting screw is eliminated, you’ll be able to gently pull the doorbell digicam straight all the way down to take away it from the bracket. Watch out to not drop the digicam.
|
1. Take away the faceplate |
Use a small flathead screwdriver to softly pry off the faceplate from the entrance of the doorbell. The faceplate is held in place by two small screws. |
|
2. Disconnect the wires |
As soon as the faceplate is eliminated, you will notice two wires linked to the again of the doorbell digicam. Disconnect these wires by gently pulling them away from the digicam. |
|
3. Take away the mounting screw |
There’s a single mounting screw positioned on the backside of the doorbell digicam. Use a Phillips head screwdriver to take away this screw. |
|
4. Take away the digicam from the bracket |
As soon as the mounting screw is eliminated, you’ll be able to gently pull the doorbell digicam straight all the way down to take away it from the bracket. Watch out to not drop the digicam. |
Reset the Doorbell
To reset your Google Doorbell, comply with these steps:
- Press the button on the again of the doorbell held for 10 seconds.
- The sunshine on the doorbell will flash after which flip off.
- The doorbell will now be reset to manufacturing facility settings.
- You’ll need to arrange the doorbell once more from scratch.
| Hassle Resetting Your Doorbell? | Answer |
|---|---|
|
Not receiving any energy |
Verify your private home’s energy provide and guarantee your doorbell is securely linked to its wires. |
|
Not responding to manufacturing facility reset |
Attempt a special button mixture or press the button for an extended period. |
|
White gentle is flashing repeatedly |
Verify when you’ve got obtained an replace notification and comply with the directions supplied. |
|
Button is just not working |
Examine the button for any free connections or bodily injury. |
Reinstall the Doorbell
As soon as you’ve got eliminated the doorbell, you’ll be able to reinstall it by following these steps:
- Align the doorbell with the mounting bracket and slide it down till it clicks into place.
- Safe the doorbell with the screws supplied.
- Exchange the faceplate by snapping it into place.
- Insert the battery into the doorbell.
- Join the doorbell to your Wi-Fi community by following the directions within the Nest app.
- Check the doorbell to ensure it is working correctly.
Troubleshooting suggestions If the doorbell is just not working correctly, attempt the next: Verify that the doorbell is linked to Wi-Fi. Be certain the battery is inserted appropriately. Reset the doorbell by urgent and holding the reset button for 10 seconds. Contact Nest help for additional help. Reconnect the Energy Provide
To reconnect the ability provide to your Google Doorbell, comply with these detailed steps:
1. Collect Your Instruments
- Screwdriver
- Electrical tape
2. Take away the Faceplate
- Utilizing a screwdriver, take away the 2 screws holding the faceplate in place.
- Gently pull the faceplate down and away from the mounting base.
3. Disconnect the Wires
- Determine the 2 wires linked to the doorbell terminals.
- Use a screwdriver to loosen the screws securing the wires.
- Gently pull the wires away from the terminals.
4. Examine the Wires
- Study the wires for any injury or corrosion.
- If the wires are broken, they could have to be changed.
5. Reconnect the Wires
- Strip about 1/2 inch of insulation from the ends of the wires.
- Reconnect the wires to the doorbell terminals by inserting them into the screws and tightening them securely.
- Be certain that the terminals are correctly linked to the proper wires (e.g., purple to energy, black or white to floor).
6. Reattach the Faceplate
- Align the faceplate with the mounting base.
- Firmly press the faceplate into place till it snaps into place.
- Safe the faceplate utilizing the screws.
7. Check the Doorbell
- Press the doorbell button to check whether it is functioning correctly.
- If the doorbell doesn’t ring, test the next:
- Be certain that the wires are securely linked.
- Check the chime or transformer to make sure they’re operational.
- Flip off the ability to the doorbell on the circuit breaker.
- Take away the faceplate of the doorbell by unscrewing the 2 screws that maintain it in place.
- Disconnect the wires from the doorbell terminals.
- Take away the doorbell from the wall by unscrewing the 2 screws that maintain it in place.
- Verify the ability to the doorbell.
- Verify the wires to the doorbell.
- Reset the doorbell.
- Contact Google help.
Troubleshoot Any Points
In case you’re having points eradicating your Google doorbell, attempt the next troubleshooting steps:
Verify the battery
Be certain the battery is absolutely charged. If the battery is low, the doorbell could not have sufficient energy to disconnect.
Verify the wiring
Guarantee all wires are securely linked. Unfastened or broken wires can forestall the doorbell from speaking with the app and disconnecting.
Restart the doorbell
Restarting the doorbell can typically resolve connection points. To restart, press and maintain the doorbell button for 10 seconds till it flashes.
Manufacturing facility reset the doorbell
Manufacturing facility resetting the doorbell will erase all settings and information. To manufacturing facility reset, press and maintain the doorbell button for 15 seconds till it flashes quickly.
Reinstall the app
In case you’re having bother disconnecting your doorbell by the app, attempt reinstalling it. This can clear any corrupted information or settings.
Verify for firmware updates
Be certain your doorbell is working the most recent firmware. Firmware updates usually embody bug fixes and efficiency enhancements.
Contact Google help
In case you’ve tried all of the above troubleshooting steps and nonetheless cannot take away your doorbell, contact Google help for additional help.
Troubleshooting Step Instructed Actions Battery test Make sure the battery is absolutely charged. Wiring test Securely join all wires. Doorbell restart Press and maintain the doorbell button for 10 seconds. Manufacturing facility reset Press and maintain the doorbell button for 15 seconds. App reinstall Take away and reinstall the app. Firmware replace test Set up the most recent firmware model. Google help contact Search help for unresolved points. Eliminate the Previous Doorbell
Upon getting efficiently eliminated your Google Doorbell, it is vital to eliminate it correctly. Listed here are the steps concerned:
1. **Verify native rules:** Completely different localities could have particular rules relating to the disposal of digital waste (e-waste). Be certain to test together with your native authorities or waste administration firm for any relevant legal guidelines or tips.
2. **Take away the batteries and circuit board:** Open the again panel of the outdated doorbell and take away the batteries and circuit board. Place the batteries in a delegated disposal container for batteries.
3. **Dismantle the doorbell:** If attainable, dismantle the doorbell into smaller elements. This can make it simpler to dispose of every half individually.
4. **Eliminate plastic and steel elements:** The housing and different plastic and steel elements of the doorbell will be disposed of in common rubbish or recycling bins.
5. **Eliminate the circuit board:** Circuit boards include beneficial metals and probably hazardous supplies. Contact your native electronics recycling heart or e-waste assortment program to eliminate the circuit board correctly.
6. **Take into account recycling:** In case your native recycling program accepts e-waste, you’ll be able to disassemble the doorbell and recycle the recyclable elements, akin to metals and plastics.
Merchandise Disposal Technique Batteries Battery disposal container or recycling program Circuit board Electronics recycling heart or e-waste assortment program Plastic and steel elements Rubbish or recycling bins Troubleshooting Google Doorbell Removing
Step 1: Collect Instruments and Security Precautions
Put on security glasses and gloves. Collect a screwdriver, needle-nose pliers, and a step ladder.
Step 2: Energy Down the Doorbell
Flip off the circuit breaker controlling the doorbell. Verify the doorbell is powered down by urgent the button.
Step 3: Take away the Doorbell Cowl
Find the screws holding the duvet in place. Use the screwdriver to take away them. Rigorously carry off the duvet.
Step 4: Disconnect the Wires
Determine the wires linked to the doorbell. Use needle-nose pliers to softly squeeze the terminals and pull the wires free.
Step 5: Take away the Mounting Bracket
Find the screws securing the mounting bracket. Unscrew them and take away the bracket from the wall.
Step 6: Deactivate the Doorbell within the App
Open the Google House app and navigate to the doorbell settings. Choose “Take away machine” and comply with the prompts.
Step 7: Reset the Doorbell (Optionally available)
Find the reset button on the doorbell. Press and maintain it for 10 seconds, or till the LED gentle flashes purple and white.
Step 8: Take away the Base Plate (If Wanted)
If the doorbell has a base plate, use a screwdriver to take away the screws holding it in place. Rigorously carry the bottom plate off the wall.
Suggestions for Stopping Future Issues
Step 9: Use Weatherproof Caulk
Seal across the edges of the mounting bracket or base plate with weatherproof caulk to forestall water injury.
Step 10: Examine Wires Recurrently
Sometimes, test the wires for fraying, corrosion, or different injury. If needed, change the wires to forestall electrical points.
Frequent Downside Answer Doorbell not ringing Verify wire connections or reset the doorbell. Poor video high quality Alter digicam angle or clear obstructions from the lens. Fixed chime Verify the transformer voltage or reset the doorbell. How you can Take away Google Doorbell
Eradicating a Google Doorbell is a straightforward course of that may be accomplished in a couple of minutes. Listed here are the steps:
As soon as the doorbell has been eliminated, you’ll be able to set up a brand new doorbell or cowl the opening within the wall.
Folks Additionally Ask
How do I reset my Google Doorbell?
To reset your Google Doorbell, press and maintain the reset button on the again of the machine for 10 seconds. The doorbell will then flash white and restart.
How do I modify the battery in my Google Doorbell?
To vary the battery in your Google Doorbell, take away the faceplate of the doorbell by unscrewing the 2 screws that maintain it in place. Then, take away the battery by lifting it out of the compartment. Insert the brand new battery into the compartment and change the faceplate.
How do I troubleshoot my Google Doorbell?
In case you are having issues together with your Google Doorbell, you’ll be able to troubleshoot it by following these steps:
