In case your cigarette lighter has stopped working, one attainable trigger could possibly be a blown fuse. Changing a cigarette lighter fuse is a comparatively easy job that may be accomplished in only a few minutes. On this article, we are going to offer you step-by-step directions on methods to substitute the fuse.
Earlier than you start, you will need to collect the mandatory instruments and supplies. You have to a brand new fuse that’s the similar amperage because the outdated fuse, a pair of needle-nose pliers, and a small screwdriver. After getting gathered your instruments and supplies, you may comply with the steps under to interchange the fuse.
First, find the fuse field. The fuse field is often positioned underneath the dashboard, however it could be positioned in a distinct location relying on the make and mannequin of your automobile. After getting positioned the fuse field, open it and discover the fuse that’s labeled “cigarette lighter.” The fuse can be a small, glass tube with a steel cap on every finish. Use the needle-nose pliers to take away the outdated fuse. Then, insert the brand new fuse into the fuse field and snap it into place. Lastly, shut the fuse field and take a look at the cigarette lighter to verify it’s working correctly.
Find the Fuse Field
The fuse field in your automobile is answerable for defending {the electrical} system from overloads and quick circuits. When a fuse blows, it interrupts the movement of electrical energy to the affected circuit. The cigarette lighter is often powered by a fuse, so if it stops working, you might want to interchange the fuse.
The placement of the fuse field can range relying on the make and mannequin of your automobile. Most often, it will likely be positioned underneath the dashboard on the driving force’s facet. Nevertheless, it could even be positioned within the engine compartment or within the trunk. If you cannot discover the fuse field, seek the advice of your automobile’s proprietor’s handbook.
After getting positioned the fuse field, open it up and seek the advice of the diagram on the within of the duvet. This diagram ought to present you which of them fuse is answerable for the cigarette lighter. After getting recognized the right fuse, use a fuse puller to take away it from the fuse field. You possibly can then examine the fuse to see if it has blown. If the steel filament contained in the fuse is damaged, it has blown and must be changed.
| Fuse Location | Fuse Kind |
|---|---|
| Underneath the dashboard on the driving force’s facet | Mini fuse |
| Within the engine compartment | Maxi fuse |
| Within the trunk | Blade fuse |
Establish the Cigarette Lighter Fuse
Find the fuse field that corresponds to your particular automobile. Consult with your proprietor’s handbook for exact directions on the situation of the fuse field. Usually, fuse containers are located in simply accessible areas corresponding to underneath the dashboard, inside the engine compartment, or contained in the glove compartment.
After getting recognized the fuse field, fastidiously study the fuses for indicators of injury or burn marks. A blown fuse may have a damaged or melted wire filament inside. Verify every fuse meticulously till you find the one answerable for the cigarette lighter.
The cigarette lighter fuse is often labeled with a selected designation corresponding to “CIG” or “ACCESSORY.” Should you can’t establish the cigarette lighter fuse, seek the advice of your proprietor’s handbook or search help from a certified mechanic.
Collect Needed Instruments
Alternative Fuse
Get hold of a suitable substitute fuse to your automobile’s cigarette lighter. Seek the advice of the proprietor’s handbook or fuse panel diagram to find out the right amperage score. The fuse field might also have a small diagram on the within of the lid that exhibits which fuse powers the cigarette lighter.
Fuse Puller or Needle-Nostril Pliers
A fuse puller is a specialised device designed to securely take away fuses. If you do not have a fuse puller, you should use a pair of needle-nose pliers with insulated handles to grip the fuse.
Flashlight or Work Gentle
In dimly lit areas, a flashlight or work mild might help you find the fuse field and establish the right fuse.
Further Instruments (Optionally available)
| Multi-meter (to check fuse continuity) |
| Alternative fuse faucets (to bypass a blown fuse) |
Take away the Outdated Fuse
Changing a cigarette lighter fuse is an easy job that requires only some easy steps. Should you’re a smoker who makes use of a cigarette lighter, you may seemingly want to interchange the fuse in some unspecified time in the future. Here is a information on methods to do it safely and simply:
Earlier than you begin, collect the next supplies:
- A brand new cigarette lighter fuse
- A pair of needle-nose pliers or tweezers
- A flashlight
After getting gathered your supplies, comply with these steps:
- **Find the fuse field**: Seek the advice of your proprietor’s handbook to seek out the precise location of the fuse field in your automobile. In most autos, it’s positioned both underneath the dashboard on the driving force’s facet or within the engine compartment. The fuse field is an oblong plastic housing that incorporates a number of fuses, which shield completely different electrical elements in your automobile, together with the cigarette lighter.
- **Open the fuse field**: Use a flathead screwdriver or your fingers to open the fuse field. Watch out to not injury the fuse field or its contents.
- **Find the cigarette lighter fuse**: The cigarette lighter fuse is often labeled on the within of the fuse field cowl. If it is not labeled, you may consult with your automobile’s proprietor’s handbook to establish it.
- **Take away the outdated fuse**: Use a pair of needle-nose pliers or tweezers to tug the outdated fuse out of its socket. Watch out to not contact the steel contacts on the tip of the fuse.
- **Insert the brand new fuse**: Take the brand new fuse and insert it into the socket the place the outdated fuse was positioned. Ensure that the fuse is inserted accurately, with the steel contacts going through the right path.
- **Shut the fuse field**: Substitute the fuse field cowl and ensure it’s securely closed.
Insert the New Fuse
Now that you’ve got your new fuse, it is time to insert it into your automobile’s fuse field. Earlier than you begin, ensure that your automobile is turned off and utterly cooled down. Use a clear, dry fabric to deal with the fuse, as oil or filth out of your arms can injury it.
Find the fuse field in your automobile. It’s often positioned underneath the dashboard on the driving force’s facet. After getting discovered the fuse field, open it up and find the fuse that corresponds to the cigarette lighter. The fuse can be labeled with the amperage score, which is often 10 amps or 15 amps. Take away the outdated fuse by gently pulling it out together with your fingers or utilizing a pair of pliers.
| Amperage Score | Fuse Coloration |
|---|---|
| 0.5-1 amp | Inexperienced |
| 2 amp | Blue |
| 3 amp | Inexperienced |
| 5 amp | Crimson |
| 7.5 amp | Yellow |
| 10 amp | Crimson |
| 15 amp | Blue |
| 20 amp | Yellow |
| 25 amp | Crimson |
| 30 amp | Blue |
Insert the brand new fuse into the fuse slot. Be sure that the fuse is inserted accurately, with the steel ends going through the right path. Substitute the fuse field cowl and tighten any screws.
Begin your automobile and test to see if the cigarette lighter is working once more. Whether it is, then you might have efficiently changed the cigarette lighter fuse.
Take a look at the Cigarette Lighter
To check if the cigarette lighter is the issue, you may strive plugging in one other system that makes use of the identical kind of energy outlet. If the opposite system works, then the issue is probably going with the cigarette lighter itself. If the opposite system would not work, then the issue could also be with the fuse.
Verify for any seen injury to the cigarette lighter, corresponding to cracks or burns. If there’s any injury, it’s best to interchange the cigarette lighter.
If there is no such thing as a seen injury, you may strive cleansing the cigarette lighter with a cotton swab and rubbing alcohol. This can take away any filth or particles that could be stopping the cigarette lighter from working.
If the cigarette lighter nonetheless doesn’t work after cleansing, then you’ll need to interchange the fuse.
**Security First:** Earlier than you start working in your automobile’s electrical system, remember to disconnect the damaging battery terminal. This can assist to stop any electrical shocks.
**Instruments and Supplies:**
| Software | Objective |
|---|---|
| Phillips screwdriver | To take away the fuse panel cowl |
| Fuse puller | To take away the outdated fuse |
| New fuse | To exchange the outdated fuse |
**Steps:**
1. Find the fuse panel. It’s often positioned underneath the dashboard on the driving force’s facet.
2. Take away the fuse panel cowl.
3. Find the fuse for the cigarette lighter. It will likely be labeled “Cigarette Lighter” or “Energy Outlet”.
4. Take away the outdated fuse utilizing a fuse puller.
5. Insert the brand new fuse into the fuse slot.
6. Substitute the fuse panel cowl.
7. Reconnect the damaging battery terminal.
8. Take a look at the cigarette lighter to verify it’s working correctly.
Troubleshooting Frequent Points
Should you’re having bother changing your cigarette lighter fuse, right here are some things to test:
1. Be sure that the brand new fuse has the right amperage. The amperage is printed on the facet of the fuse. If the fuse is simply too excessive or too low of an amperage, it may trigger injury to your automobile.
2. Be sure that the fuse is correctly seated within the fuse block. The fuse ought to match snugly into the fuse block. If the fuse just isn’t correctly seated, it may trigger a poor connection and stop the cigarette lighter from working.
3. Be sure that the cigarette lighter socket is clear. Over time, the cigarette lighter socket can turn out to be soiled or corroded. This may stop the cigarette lighter from making an excellent connection and dealing correctly.
4. Be sure that the wiring to the cigarette lighter just isn’t broken. The wiring to the cigarette lighter can turn out to be broken over time, particularly whether it is uncovered to the weather. If the wiring is broken, it may stop the cigarette lighter from working correctly.
5. Verify the cigarette lighter itself. The cigarette lighter itself is perhaps broken and should must be changed if it’s not making an excellent connection or working correctly
6. Verify for another points that could be inflicting the cigarette lighter to not work. There could possibly be different points inflicting the cigarette lighter to not work, corresponding to an issue with the ignition swap or {the electrical} system.
Fuse Amperage Chart for Cigarette Lighter Socket
| Car Make | Fuse Amperage |
|---|---|
| Chevrolet | 10A |
| Ford | 15A |
| Toyota | 10A |
| Honda | 5A |
Observe: Consult with your automobile’s proprietor’s handbook for particular fuse amperage and site.
Security Precautions
Earlier than changing the cigarette lighter fuse, it’s essential to take the next security precautions:
- Disconnect the Battery: Disconnect the damaging terminal of the battery to stop any electrical shock or quick circuit.
- Put on Gloves: Put on insulated gloves to guard your arms from touching the fuse and surrounding electrical elements.
- Use Insulated Instruments: Make use of insulated instruments like screwdrivers and pliers to keep away from electrical contact.
- Examine the Fuse: Study the outdated fuse for any injury, corresponding to breaks or burn marks. Broken fuses ought to be changed instantly.
- Use the Appropriate Fuse: Substitute the fuse with one of many similar amperage score as the unique. Utilizing a higher-rated fuse can result in electrical injury.
- Tighten Connections: Be sure that all electrical connections are correctly tightened to stop unfastened wires.
- Examine Wiring: If the fuse has blown repeatedly, examine the wiring for any shorts or injury.
- Keep away from Sparking: Don’t contact the fuse terminals or the uncovered steel elements of the fuse holder whereas the ignition is on or the battery is related.
- Take a look at the Circuit: After changing the fuse, reconnect the damaging battery terminal and take a look at the cigarette lighter to make sure it’s functioning accurately.
Skilled Help
In case you are uncomfortable performing electrical repairs or lack the mandatory instruments, it’s extremely beneficial to hunt skilled help. A professional mechanic can substitute the cigarette lighter fuse shortly and safely, guaranteeing that your automobile’s electrical system stays in optimum situation.
Relying on the complexity of the restore and the hourly labor fee of the mechanic, the price of skilled help might range. It’s advisable to acquire a quote earlier than continuing with the restore.
Listed below are the steps concerned in changing the cigarette lighter fuse with skilled help:
- Contact a good mechanic or automotive restore store.
- Clarify the issue and schedule an appointment.
- Convey your automobile to the restore facility on the scheduled time.
- The mechanic will examine the fuse field and establish the blown cigarette lighter fuse.
- The mechanic will take away the blown fuse and substitute it with a brand new one of many right amperage.
- The mechanic will take a look at the cigarette lighter to make sure correct performance.
- The mechanic will present an bill for the service carried out.
| Execs | Cons |
|---|---|
| Skilled workmanship and accuracy | Greater price in comparison with DIY restore |
| Peace of thoughts understanding the restore was carried out accurately | Could require scheduling an appointment |
| Restricted guarantee or assure on the restore | Potential lack of quick availability of mechanic |
Methods to Substitute Cigarette Lighter Fuse
Changing a blown cigarette lighter fuse is a comparatively easy job that may be accomplished in a couple of minutes. Listed below are the steps on methods to do it:
- Find the fuse field. The fuse field is often positioned underneath the dashboard on the driving force’s facet. Seek the advice of your automobile’s proprietor’s handbook for the precise location.
- Establish the cigarette lighter fuse. The fuse field may have a diagram that identifies the situation of every fuse. Discover the fuse that’s labeled “cigarette lighter” or “energy outlet”.
- Take away the blown fuse. Use a fuse puller or a pair of needle-nose pliers to take away the blown fuse from the fuse field.
- Set up the brand new fuse. Insert a brand new fuse of the identical amperage because the blown fuse into the fuse field. Ensure that the fuse is pushed in all the way in which.
- Take a look at the cigarette lighter. Activate the ignition and insert a cigarette lighter into the socket. If the lighter works, then the fuse has been changed efficiently.
Individuals Additionally Ask About Methods to Substitute Cigarette Lighter Fuse
The place is the fuse for the cigarette lighter?
The fuse for the cigarette lighter is often positioned within the fuse field underneath the dashboard on the driving force’s facet. Seek the advice of your automobile’s proprietor’s handbook for the precise location.
What amperage fuse do I would like for the cigarette lighter?
The amperage of the fuse you want for the cigarette lighter will rely in your automobile. Seek the advice of your automobile’s proprietor’s handbook for the right amperage.
Can I substitute the cigarette lighter fuse myself?
Sure, changing the cigarette lighter fuse is a comparatively easy job that may be accomplished in a couple of minutes. Comply with the steps outlined above to do it your self.
