Insert the New Twine
To insert the brand new twine, comply with these steps:
1. Unwind the brand new twine from the spool and straighten it out.
2. Insert the tip of the brand new twine into the opening within the heart of the trimmer head.
3. Pull the twine by way of the opening till you attain the specified size.
4. Safe the twine in place by winding it across the spool and inserting it into the slot. Be sure that the twine is wound within the appropriate path, as specified within the trimmer’s consumer handbook.
Listed below are some extra suggestions for inserting the brand new twine:
Use a brand-new twine of the identical measurement and form as the unique twine. A mismatched twine may cause harm to the trimmer.
Don’t overwind the twine across the spool. Overwinding may cause the twine to interrupt prematurely.
Trim the surplus twine on the finish of the trimmer head.
Wind the Twine Across the Spool
As soon as you’ve got wound the twine across the spool, you should safe it in place. Do that by inserting the free finish of the twine into the opening within the heart of the spool. Pull the twine taut and wrap it across the outdoors of the spool in a figure-8 sample. Be sure that to maintain the twine taut as you wrap it. As soon as you’ve got wrapped the twine across the spool a number of instances, tuck the tip of the twine into the opening within the heart of the spool once more.
Ideas for Winding the Twine
- Use a pointy knife to chop the twine cleanly.
- Wind the twine in a figure-8 sample to forestall it from binding.
- Maintain the twine taut as you wrap it across the spool.
- Tuck the tip of the twine into the opening within the heart of the spool to safe it.
| Step | Description |
|---|---|
| 1 | Reduce the twine to the specified size. |
| 2 | Wind the twine across the spool in a figure-8 sample. |
| 3 | Maintain the twine taut as you wrap it. |
| 4 | Tuck the tip of the twine into the opening within the heart of the spool. |
The best way to Exchange Weed Eater Twine
Changing the twine on a weed eater is a straightforward process that may be accomplished in a couple of minutes. With only a few fundamental instruments, you may have your weed eater up and operating once more very quickly.
- Unplug the weed eater from the facility outlet.
- Take away the previous twine. To do that, merely unscrew the cap on the tip of the weed eater and pull out the previous twine.
- Reduce a brand new twine to the specified size. The brand new twine must be lengthy sufficient to achieve from the weed eater to the facility outlet, however not so lengthy that it will get in the way in which while you’re utilizing it.
- Set up the brand new twine. To do that, merely insert the brand new twine into the opening ultimately of the weed eater and screw on the cap.
- Plug within the weed eater and check it out.
Individuals Additionally Ask
How typically ought to I exchange my weed eater twine?
You need to exchange your weed eater twine each 6 to 12 months, or extra typically if you happen to use it often.
What sort of twine ought to I exploit?
You need to use a 14-gauge, 3-wire twine that’s rated for outside use.
How lengthy ought to my new twine be?
Your new twine must be lengthy sufficient to achieve from the weed eater to the facility outlet, however not so lengthy that it will get in the way in which while you’re utilizing it.
Can I exploit an extension twine with my weed eater?
Sure, you should use an extension twine together with your weed eater, however remember to use a heavy-duty extension twine that’s rated for outside use.
