Embark on a do-it-yourself journey with this complete information to dismantling your Xbox One S. Whether or not you are going through a minor restore or in search of a deeper understanding of the console’s internal workings, this step-by-step tutorial will empower you with the data and confidence to disassemble your Xbox One S with ease. By following our meticulously detailed directions, you will navigate the intricate elements and thoroughly extract them, leaving no screw unturned and no thriller unsolved.
Earlier than embarking on this disassembly, it is crucial to assemble the mandatory instruments and create a workspace conducive to precision work. Guarantee you’ve got entry to a set of screwdrivers, together with T8, T10, and T15 sizes. Moreover, a plastic spudger or opening software will show invaluable for gently prying and separating elements with out inflicting harm. As you proceed via the disassembly course of, meticulous group is essential. Maintain monitor of screws and small components, meticulously labeling them to keep away from any mix-ups throughout reassembly.
As you enterprise deeper into the console’s recesses, you will uncover a myriad of elements. Be ready to come across the facility provide, motherboard, CPU, GPU, exhausting drive, and optical drive. Disconnect cables with precision, paying attention to their authentic positions to facilitate seamless reassembly. All through the disassembly, deal with elements with care, avoiding potential harm attributable to static discharge. With every profitable step, your understanding of the Xbox One S’s intricate design will deepen, empowering you with the data to resolve any points that will come up sooner or later.
Figuring out the Mandatory Instruments
Earlier than embarking in your Xbox One S disassembly, it is essential to assemble the suitable instruments. These instruments will make it easier to dismantle and reassemble the console safely and effectively. Here is the record of important instruments you will want:
| Device | Function |
|---|---|
| Phillips #0 Screwdriver | Eradicating and tightening screws all through the console |
| T8 Torx Screwdriver | Loosening the screws securing the underside panel |
| T9 Torx Screwdriver | Eradicating the screws holding the disc drive in place |
| Plastic Pry Instruments | Gently separating and prying open numerous elements |
| Tweezers | Dealing with small components, equivalent to screws and connectors |
| Anti-Static Wrist Strap | Stopping electrostatic discharge that may harm elements |
Along with these instruments, it is advisable to have a well-lit workspace, a clear floor, and a magnetic tray to maintain monitor of small components. Collect these instruments earlier than beginning the disassembly course of to keep away from any interruptions or delays.
Powering Down and Unplugging the Gadget
Safely Powering Down Your Xbox One S
Earlier than you start to disassemble your Xbox One S, it is essential to energy it down appropriately. To do that:
1. Press the Xbox button on the console or controller to open the Information.
2. Choose “Settings” from the menu.
3. Navigate to “Normal” after which “Energy mode & startup.”
4. Select “Shut down console” and ensure your choice.
As soon as the console is totally powered down, you may proceed to unplug it from the facility outlet.
Unplugging the Console and Peripherals
1. Find the facility cable linked to the again of the Xbox One S.
2. Firmly grasp the plug and gently pull it straight out of the facility outlet.
3. Disconnect any peripherals linked to the console, together with controllers, headsets, and exterior storage gadgets.
Suggestions for Secure Unplugging
| Tip | Description |
|---|---|
| Keep away from pulling on the cable | This could harm the cable or the port on the console. |
| Use your fingers or a software | If it is tough to take away the plug by hand, use a small software like a flathead screwdriver to softly pry it out. |
| Guarantee all connections are agency | Earlier than plugging the console again in, be certain that all cords are securely linked. |
Eradicating the Prime Cowl
To take away the highest cowl of your Xbox One S, you will have a Torx T8 screwdriver. Listed here are the steps:
- Find the 2 black screws on the again of the console, close to the underside. These screws are lined by rubber ft, which you’ll take away along with your fingers.
- Take away the 2 screws.
- Elevate the highest cowl up and off the console. The duvet is held in place by clips, so it might require some drive to take away it.
Eradicating the Rubber Toes
The rubber ft on the underside of the Xbox One S are held in place by adhesive. To take away them, you should utilize a pair of tweezers or a flathead screwdriver.
In case you are utilizing tweezers, merely seize the sting of the rubber foot and pull it up. In case you are utilizing a flathead screwdriver, insert the screwdriver beneath the sting of the rubber foot and pry it up.
Eradicating the Screws
The screws that maintain the highest cowl in place are Torx T8 screws. To take away them, you will have a Torx T8 screwdriver.
Insert the screwdriver into the top of the screw and switch it counterclockwise to loosen the screw. As soon as the screw is unfastened, you may take away it by hand.
| Step | Motion |
|---|---|
| 1 | Find the 2 black screws on the again of the console, close to the underside. |
| 2 | Take away the 2 screws. |
| 3 | Elevate the highest cowl up and off the console. |
Disconnecting Inside Elements
As soon as the highest cowl is eliminated, you may start disconnecting the interior elements. Here is a step-by-step information:
1. Disconnect the Energy Provide
Find the facility provide unit behind the console. Gently pull the facility provide connector from the motherboard.
2. Disconnect the Optical Drive
Pull the optical drive ribbon cable from the motherboard. Subsequent, take away the 2 screws securing the optical drive to the chassis. Then, rigorously carry the optical drive out of the console.
3. Unplug the Bluetooth and Wi-Fi Module
Find the Bluetooth and Wi-Fi module on the motherboard. Rigorously unplug the module’s ribbon cable.
4. Detach the Fan and Heatsink Meeting
The fan and heatsink meeting have to be rigorously indifferent. It consists of the next elements:
| Part | Description |
|---|---|
| Fan | Cools the console whereas working |
| Heatsink | Dissipates warmth away from the processor and different elements |
| Two screws | Safe the heatsink to the chassis |
| Thermal paste | Conducts warmth from the processor to the heatsink |
To take away the fan and heatsink meeting, observe these steps:
- Find the 2 screws that safe the heatsink to the chassis.
- Utilizing a screwdriver, take away the screws.
- Rigorously carry the heatsink straight as much as detach it from the console.
- Examine the thermal paste and clear any extra earlier than reassembly.
- Detach the fan from the heatsink by disconnecting its energy connector.
Eradicating the Energy Provide Unit
Step 1: Unplug the console. Make sure the Xbox One S is just not linked to any energy supply earlier than continuing.
Step 2: Take away the underside panel. Flip the console the wrong way up and find the plastic panel overlaying the underside. Push down on the tabs on the edges and slide the panel in the direction of the entrance of the console to take away it.
Step 3: Disconnect the facility provide unit harness. Contained in the console, discover the black cable harness connecting the facility provide unit to the motherboard. Gently pull the harness connector straight as much as disconnect it.
Step 4: Take away the facility provide unit screws. There are 4 screws securing the facility provide unit to the chassis. Take away these screws utilizing a T10 Torx screwdriver.
Step 5: Elevate and take away the facility provide unit. Rigorously carry the facility provide unit up and out of the chassis. It could be essential to wiggle it barely to free it from any clips or tabs securing it in place.
| Part | Description |
|---|---|
| Energy provide unit harness | Connects the facility provide unit to the motherboard |
| T10 Torx screwdriver | Required for eradicating the facility provide unit screws |
Separating the Controller Ports
After getting eliminated the highest panel, you will have to separate the controller ports from the primary physique of the console. To do that, you will have to make use of a Philips #00 screwdriver to take away the 4 screws which are holding the controller ports in place.
As soon as the screws have been eliminated, you may rigorously carry the controller ports up and away from the primary physique of the console. Watch out to not harm the ribbon cable that’s connecting the controller ports to the motherboard.
With the controller ports eliminated, you’ll now have entry to the motherboard and different inside elements of the console.
Here’s a extra detailed step-by-step information to separating the controller ports:
- Take away the highest panel of the console.
- Find the 4 screws which are holding the controller ports in place.
- Use a Philips #00 screwdriver to take away the screws.
- Rigorously carry the controller ports up and away from the primary physique of the console.
- Watch out to not harm the ribbon cable that’s connecting the controller ports to the motherboard.
After getting separated the controller ports, you may proceed to the subsequent step of disassembling the console.
Reassembling the Xbox One S
After getting cleaned and inspected all the elements, it’s time to reassemble the Xbox One S. Begin by putting the motherboard again into the chassis. Be sure that the connectors are correctly aligned and that the screws are tightened securely. Subsequent, connect the facility provide to the motherboard and safe it with screws. Join the HDMI port to the motherboard and safe it with a screw. Connect the optical drive to the motherboard and safe it with screws. Join the exhausting drive to the motherboard and safe it with screws. Join the wi-fi card to the motherboard and safe it with screws. Place the highest cowl on the Xbox One S and safe it with screws. Join the facility twine and HDMI cable to the Xbox One S and switch it on to check it.
10. Join the entrance panel and buttons
The entrance panel is the final piece to be put in. It snaps into place excessive and sides of the Xbox One S. Be sure that the entrance panel is correctly aligned earlier than snapping it into place. As soon as the entrance panel is in place, you may connect the buttons. The buttons are held in place by clips. To connect a button, merely push it into place till it snaps into the clip. As soon as all the buttons are connected, you’ve got efficiently reassembled the Xbox One S. Congratulations!
Further suggestions
Listed here are just a few extra suggestions for reassembling the Xbox One S:
- Watch out to not overtighten the screws.
- Be sure that all the connectors are correctly aligned earlier than connecting them.
- In case you are having any issue reassembling the Xbox One S, consult with the official Xbox One S service guide.
| Part | Screws |
|---|---|
| Motherboard | 4 |
| Energy provide | 4 |
| HDMI port | 1 |
| Optical drive | 4 |
| Arduous drive | 4 |
| Wi-fi card | 2 |
| Prime cowl | 5 |
| Entrance panel | Snaps into place |
| Buttons | Clips |
How To Take Aside Xbox One S
To take aside an Xbox One S, you will have the next instruments:
- A Phillips #00 screwdriver
- A T8 Torx screwdriver
- A plastic spudger
- A pair of tweezers
After getting gathered your instruments, observe these steps:
- Unplug the Xbox One S from the facility outlet and take away all cables.
- Place the Xbox One S the wrong way up on a flat floor.
- Use the T8 Torx screwdriver to take away the eight screws that safe the underside cowl of the Xbox One S.
- Use the plastic spudger to softly pry the underside cowl off of the Xbox One S.
- Use the Phillips #00 screwdriver to take away the 2 screws that safe the optical drive.
- Disconnect the facility cable from the optical drive.
- Use the plastic spudger to softly pry the optical drive out of the Xbox One S.
- Use the Phillips #00 screwdriver to take away the 4 screws that safe the motherboard.
- Disconnect the ribbon cables from the motherboard.
- Rigorously carry the motherboard out of the Xbox One S.
- Use the tweezers to take away the thermal paste from the CPU and GPU.
- Use the plastic spudger to softly pry the warmth sink off of the CPU and GPU.
- Exchange the thermal paste on the CPU and GPU.
- Reattach the warmth sink to the CPU and GPU.
- Reinsert the motherboard into the Xbox One S.
- Reconnect the ribbon cables to the motherboard.
- Reinsert the optical drive into the Xbox One S.
- Reconnect the facility cable to the optical drive.
- Exchange the 2 screws that safe the optical drive.
- Exchange the underside cowl of the Xbox One S.
- Exchange the eight screws that safe the underside cowl.
- Plug the Xbox One S again into the facility outlet and reconnect all cables.
Folks Additionally Ask About How To Take Aside Xbox One S
How do I open an Xbox One S with out breaking it?
To open an Xbox One S with out breaking it, you will have to observe the steps outlined above rigorously. Make sure you use the proper instruments and be mild when prying the elements aside.
What are the commonest issues with Xbox One S?
The commonest issues with Xbox One S embrace overheating, disc drive points, and controller issues.
How can I forestall my Xbox One S from overheating?
To stop your Xbox One S from overheating, it’s best to make it possible for it’s well-ventilated and that the vents are usually not blocked. You must also keep away from putting the Xbox One S in enclosed areas or close to warmth sources.
